AD8051ARTZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | AD8051 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 5.5mA |
| Nominal Supply Current | 5.5mA |
| Output Current | 45mA |
| Quiescent Current | 5.5mA |
| Slew Rate | 170V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 88 dB |
| Current - Input Bias | 1.4μA |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 11mV |
| Bandwidth | 110MHz |
| Gain Bandwidth Product | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 110000 kHz |
| Voltage Gain | 98dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 1.8mV |
| Settling Time | 50 ns |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 2.6μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.4pF |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8051ARTZ-REEL7 Overview
The linear amplifier is packaged in a SC-74A, SOT-753 case. This is a Voltage Feedback type op amp. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 5. Buffer amplifier has a total of 5 pins on it. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 5 pins are located on the operational amplifiers. The input offset voltage is 11mV. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . Operational amplifier can operate supply current at 5.5mA. 98dB should remain the voltage gain. On the buffer amps, there are 1 channels that can be used. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 5V voltage. It is used TAPE AND REEL to pack the op amps. As a result, linear amplifier's quiescent current is 5.5mA.
AD8051ARTZ-REEL7 Features
5 Pins
supply voltage of 5V
98dB voltage gain
Output Type: Rail-to-Rail
AD8051ARTZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8051ARTZ-REEL7 Instrumentational OP Amps applications.
- Blood pressure sensors
- Portable electronic products powered by batteries
- Comparator
- Power generator
- Tablets
- Strain gauges
- single/dual op amp sum and difference circuits
- Wireless base stations
- RF cable systems
- Digital cameras
