AD8051ARZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | AD8051 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 5.5mA |
| Nominal Supply Current | 5.5mA |
| Output Current | 45mA |
| Quiescent Current | 5.5mA |
| Min Input Voltage | 3V |
| Slew Rate | 170V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 88 dB |
| Current - Input Bias | 1.4μA |
| Max Input Voltage | 12V |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 11mV |
| Gain Bandwidth Product | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 110000 kHz |
| Voltage Gain | 98dB |
| Average Bias Current-Max (IIB) | 3.5μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.8mV |
| Settling Time | 50 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 110MHz |
| Max Frequency | 10kHz |
| Bias Current-Max (IIB) @25C | 2.6μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.4pF |
| Wideband | YES |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8051ARZ-REEL7 Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. This is a Voltage Feedback type op amp. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. The number of terminations approaches 8. It consists of a total of 8 pins in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. There are 8 pins on this chip. As far as the input offset voltage is concerned, linear amplifier rates at 11mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. This op amp can operate from a supply current at 5.5mA. The voltage gain should stay at 98dB. There are a total of 1 channels available on the op amps. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 5V voltage. It is used TAPE AND REEL to pack the op amps. Currently, linear amplifier is operating with a quiescent current of 5.5mA.
AD8051ARZ-REEL7 Features
8 Pins
supply voltage of 5V
98dB voltage gain
Output Type: Rail-to-Rail
AD8051ARZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8051ARZ-REEL7 Instrumentational OP Amps applications.
- Multimedia playback equipment
- Home audio systems
- Automation control systems
- Automotive sensors
- Tablets
- Oscilloscopes
- Blood pressure sensors
- Logarithmic operation circuits
- Measurements of Wheatstone bridge
- Proportional operation circuits
