AD8052ARMZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | AD8052 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Channels | 2 |
| Operating Supply Current | 11mA |
| Nominal Supply Current | 11mA |
| Output Current | 45mA |
| Quiescent Current | 5.5mA |
| Slew Rate | 170V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 88 dB |
| Current - Input Bias | 1.4μA |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 11mV |
| Bandwidth | 110MHz |
| Gain Bandwidth Product | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 110000 kHz |
| Voltage Gain | 98dB |
| Average Bias Current-Max (IIB) | 3.5μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 1.8mV |
| Settling Time | 50 ns |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.4pF |
| Height | 950μm |
| Length | 3.2mm |
| Width | 3.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8052ARMZ-REEL7 Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case in which the instrumentation amplifier is packaged. This is a Voltage Feedback type op amp. A Tape & Reel (TR) case is used for delivering the op amp. The number of terminations approaches 8. A total of 8 pins are attached to buffer op amp. Please take in mind that this instrumentation amplifier should be run at 5V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. There are 8 pins on this chip. With regard to input offset voltage, instrumentation amplifier is rated at 11mV. Surface Mount is the recommended mounting type for this linear amplifier. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . A supply current of 11mA can be used to operate this linear amplifier. It is recommended to keep the voltage gain at 98dB at all times. There are a total of 2 channels available on the op amps. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 5V. As a result of this, the buffer amplifier is packed in TAPE AND REEL. Currently, linear amplifier is operating with a quiescent current of 5.5mA.
AD8052ARMZ-REEL7 Features
8 Pins
supply voltage of 5V
98dB voltage gain
Output Type: Rail-to-Rail
AD8052ARMZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8052ARMZ-REEL7 Instrumentational OP Amps applications.
- Weak signal detection
- pH (acidity)
- Video data acquisition
- High/low-pass filter circuit
- Radar
- Gaming industry
- Portable docking station
- Wireless base stations
- Subtraction operation circuits
- Video conversion and routing
