AD8054AR
| Parameters | |
|---|---|
| Lead Free | Contains Lead |
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8054 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 12V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 4 |
| Operating Supply Current | 2.875mA |
| Nominal Supply Current | 13.6mA |
| Output Current | 30mA |
| Quiescent Current | 3.4mA |
| Slew Rate | 190V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 1.7mV |
| Bandwidth | 150000 kHz |
| Gain Bandwidth Product | 80MHz |
| Voltage Gain | 98dB |
| Power Supply Rejection Ratio (PSRR) | 68dB |
| Voltage - Input Offset | 1.8mV |
| Settling Time | 40 ns |
| -3db Bandwidth | 160MHz |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.5pF |
| Consumer IC Type | VIDEO AMPLIFIER |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
AD8054AR Overview
Op amp is packaged in 14-SOIC (0.154, 3.90mm Width) case. Op amps are Voltage Feedback types of amplifier on the chip. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 14 terminations in the next few months. There are a total of 14 pins on this op amp. In total, the buffer amplifier consists of 14 pins. With regard to input offset voltage, instrumentation amplifier is rated at 1.7mV. This electronic part is recommended for mounting type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . Operational amplifier can operate supply current at 2.875mA. There should be no change in the voltage gain at 98dB. Instrumentation amplifier has 4 channels on it. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 5V voltage. As a result, linear amplifier's quiescent current is 3.4mA. In order to sort customer IC types, use VIDEO AMPLIFIER.
AD8054AR Features
14 Pins
98dB voltage gain
Output Type: Rail-to-Rail
AD8054AR Applications
There are a lot of Analog Devices Inc. AD8054AR Instrumentational OP Amps applications.
- Radiation thermometry transducers
- Signal filtering
- Strain gauges
- Power control
- Signal operation
- Commercial audio systems
- Band-pass filter
- Vehicle electronics
- Active probe
- Communication
