AD8054AR-REEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8054 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Channels | 4 |
| Operating Supply Current | 13.6mA |
| Nominal Supply Current | 13.6mA |
| Output Current | 30mA |
| Quiescent Current | 3.4mA |
| Slew Rate | 190V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 13mV |
| Gain Bandwidth Product | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 98dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 1.8mV |
| Settling Time | 40 ns |
| -3db Bandwidth | 160MHz |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.5pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Wideband | YES |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD8054AR-REEL Overview
In the package, you will find a 14-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. An op amp ic of the Voltage Feedback type. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. We are approaching the 14h termination of the year. A total of 14 pins are located on this board. This linear amplifier should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 14 pins are available on the instrumentation amplifier. There is an input offset voltage of 13mV for this buffer op amp. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. Using a supply current of 13.6mA , this buffer op amp will be able to operate. There should be no change in the voltage gain at 98dB. Buffer op amp is equipped with 4 channels on the device. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The instrumentation amplifier is packed in the form of TAPE AND REEL. There is a quiescent current of 3.4mA in this operational amplifier circuit.
AD8054AR-REEL Features
14 Pins
supply voltage of 5V
98dB voltage gain
Output Type: Rail-to-Rail
AD8054AR-REEL Applications
There are a lot of Analog Devices Inc. AD8054AR-REEL Instrumentational OP Amps applications.
- Hand-held batteries
- Navigation
- Computer workstations
- Precision measurement
- Proportional counter tubes
- High speed sample
- Industrial control system
- Signal amplification
- Car stereo
- Power generator
