AD8054ARU
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8054 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 12V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 4 |
| Operating Supply Current | 2.875mA |
| Nominal Supply Current | 13.6mA |
| Output Current | 30mA |
| Quiescent Current | 3.4mA |
| Slew Rate | 190V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 1.7mV |
| Bandwidth | 150000 kHz |
| Gain Bandwidth Product | 80MHz |
| Voltage Gain | 98dB |
| Power Supply Rejection Ratio (PSRR) | 68dB |
| Voltage - Input Offset | 1.8mV |
| Settling Time | 40 ns |
| -3db Bandwidth | 160MHz |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.5pF |
| Consumer IC Type | VIDEO AMPLIFIER |
| Height | 1mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD8054ARU Overview
Op amp is packaged in 14-TSSOP (0.173, 4.40mm Width) case. The instrumentation amplifier in this picture is of the Voltage Feedback-type. Linear amplifier is delivered in a Tube case. The number of terminations is approaching the 14 mark. Buffer amplifier has a total of 14 pins on it. An 14-pin op amp ic is included in the package. There is an input offset voltage of 1.7mV for this buffer op amp. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. You can run this op amp ic on 2.875mA . You should keep the voltage gain at 98dB for the time being. Instrumentation amplifier has 4 channels on it. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 5V voltage. Linear amplifier has a quiescent current of 3.4mA. In order to sort customer IC types, use VIDEO AMPLIFIER.
AD8054ARU Features
14 Pins
98dB voltage gain
Output Type: Rail-to-Rail
AD8054ARU Applications
There are a lot of Analog Devices Inc. AD8054ARU Instrumentational OP Amps applications.
- Image computer boards
- Gaming industry
- Multiplication circuits
- Power control
- Weak signal detection
- Broadcasting
- Measurements of Wheatstone bridge
- Blood pressure sensors
- Communication
- Multimedia playback equipment
