AD8054ARUZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | AD8054 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Channels | 4 |
| Operating Supply Current | 13.6mA |
| Nominal Supply Current | 13.6mA |
| Output Current | 30mA |
| Quiescent Current | 3.4mA |
| Slew Rate | 190V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 13mV |
| Gain Bandwidth Product | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 98dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 1.8mV |
| Settling Time | 40 ns |
| -3db Bandwidth | 160MHz |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.5pF |
| Wideband | YES |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8054ARUZ-REEL Overview
Packaging for the buffer amplifier is in the form of a 14-TSSOP (0.173, 4.40mm Width) case. This is a Voltage Feedback type op amp. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. It is estimated that there will be at least 14 terminations this year. The total number of pins on linear amplifier is 14. This linear amplifier should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. An 14-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 13mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. With regard to operating temperature, op amp ranges -40°C~125°C. You can run this op amp ic on 13.6mA . Voltage gain should remain at 98dB. Op amp ic has 4 channels. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. The operating supply voltage of the buffer op amp is rated at 5V. TAPE AND REEL is adopted to pack the instrumentation amplifier. Linear amplifier has a quiescent current of 3.4mA.
AD8054ARUZ-REEL Features
14 Pins
supply voltage of 5V
98dB voltage gain
Output Type: Rail-to-Rail
AD8054ARUZ-REEL Applications
There are a lot of Analog Devices Inc. AD8054ARUZ-REEL Instrumentational OP Amps applications.
- Vehicle electronics
- Non-polarized electrodes
- Radar
- Exponential operation circuits
- Power transmission
- High-frequency data acquisition systems
- Micro signal measurement
- RF cable systems
- Video data acquisition
- Scintillation detectors
