AD8054ARUZ-REEL7
| Parameters | |
|---|---|
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | AD8054 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Channels | 4 |
| Operating Supply Current | 13.6mA |
| Nominal Supply Current | 13.6mA |
| Output Current | 30mA |
| Quiescent Current | 3.4mA |
| Slew Rate | 190V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 13mV |
| Gain Bandwidth Product | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 98dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 1.8mV |
| Settling Time | 40 ns |
| -3db Bandwidth | 160MHz |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.5pF |
| Wideband | YES |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
AD8054ARUZ-REEL7 Overview
In order to protect the op amps, a 14-TSSOP (0.173, 4.40mm Width) case is used. Voltage Feedback-type instrumentation amplifiers are used in this application. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 14. It consists of a total of 14 pins in total. Please take in mind that this instrumentation amplifier should be run at 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. There are 14 pins on this chip. With regards to the offset voltage of the input, buffer amplifier is rated at 13mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . This op amp can operate from a supply current at 13.6mA. It is recommended to keep the voltage gain at 98dB at all times. There are a total of 4 channels available on the op amps. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 5V. The linear amplifier is packaged by using a TAPE AND REEL axis. There is a quiescent current of 3.4mA in this operational amplifier circuit.
AD8054ARUZ-REEL7 Features
14 Pins
supply voltage of 5V
98dB voltage gain
Output Type: Rail-to-Rail
AD8054ARUZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8054ARUZ-REEL7 Instrumentational OP Amps applications.
- Cinema or auditorium audio system
- Vehicle electronics
- Wireless base stations
- Band-pass filter
- Division circuits
- High input resistance broadband
- Measurements of Wheatstone bridge
- Thermocouples
- Non-polarized electrodes
- Multiplication circuits
