AD8054ARZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | AD8054 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Channels | 4 |
| Operating Supply Current | 13.6mA |
| Nominal Supply Current | 13.6mA |
| Output Current | 30mA |
| Quiescent Current | 3.4mA |
| Slew Rate | 190V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 13mV |
| Gain Bandwidth Product | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 98dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 1.8mV |
| Settling Time | 40 ns |
| -3db Bandwidth | 160MHz |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.5pF |
| Wideband | YES |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8054ARZ-REEL Overview
In order to protect the op amps, a 14-SOIC (0.154, 3.90mm Width) case is used. Voltage Feedback-type instrumentation amplifiers are used in this application. A Tape & Reel (TR) case is used for delivering the op amp. The number of terminations approaches 14. The total number of pins on linear amplifier is 14. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. Linear amplifier includes 14 pins. There is an input offset voltage of 13mV for this buffer op amp. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . Using an 13.6mA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain at 98dB. The op amp ic has 4 channels on it. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The operating supply voltage of the buffer op amp is rated at 5V. TAPE AND REEL is adopted to pack the instrumentation amplifier. 3.4mA quiescent currents are flowing through buffer op amp.
AD8054ARZ-REEL Features
14 Pins
supply voltage of 5V
98dB voltage gain
Output Type: Rail-to-Rail
AD8054ARZ-REEL Applications
There are a lot of Analog Devices Inc. AD8054ARZ-REEL Instrumentational OP Amps applications.
- Signal operation
- Tablets
- Large motor controllers
- pH (acidity)
- Medical imaging
- Hand-held batteries
- Subtraction operation circuits
- Communication device
- MP3
- Wireless base stations
