AD8055ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8055 |
| Pin Count | 8 |
| Operating Supply Voltage | 10V |
| Number of Channels | 1 |
| Operating Supply Current | 6.5mA |
| Nominal Supply Current | 6.5mA |
| Output Current | 60mA |
| Quiescent Current | 6.5mA |
| Slew Rate | 1400V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 82 dB |
| Current - Input Bias | 400nA |
| Voltage - Supply, Single/Dual (±) | 8V~12V ±4V~6V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 300MHz |
| Gain Bandwidth Product | 120MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 71dB |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Voltage - Input Offset | 3mV |
| Gain | 1 dB |
| Settling Time | 20 ns |
| Dual Supply Voltage | 5V |
| Input Capacitance | 2pF |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8055ARZ Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. An op amp of this type is a Voltage Feedback-type. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. A total of 8 terminations have been reported in the past few weeks. In this case, there are 8 pins on the board. I would like to remind you that this buffer op amp should be powered by an 5V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 8 pins are located on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 5mV. This electronic part is best mounted with type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. Using a supply current of 6.5mA , this buffer op amp will be able to operate. The voltage gain should stay at 71dB. There are a total of 1 channels available on the op amps. The operating supply voltage of the buffer op amp is rated at 10V. There is an 6.5mA quiescent current running through op amp ic.
AD8055ARZ Features
8 Pins
supply voltage of 5V
71dB voltage gain
AD8055ARZ Applications
There are a lot of Analog Devices Inc. AD8055ARZ Instrumentational OP Amps applications.
- Multimedia playback equipment
- Addition operation circuits
- Multiplication circuits
- Car stereo
- Voltage regulation circuit
- Radar
- High/low-pass filter circuit
- Active probe
- Comparator
- Ultrasound transducers
