AD8056AR-REEL7
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8056 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 10V |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Channels | 2 |
| Operating Supply Current | 12mA |
| Nominal Supply Current | 12mA |
| Output Current | 60mA |
| Quiescent Current | 6mA |
| Slew Rate | 1400V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 82 dB |
| Current - Input Bias | 400nA |
| Voltage - Supply, Single/Dual (±) | 8V~12V ±4V~6V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 300000 kHz |
| Gain Bandwidth Product | 120MHz |
| Voltage Gain | 71dB |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Voltage - Input Offset | 3mV |
| Settling Time | 20 ns |
| -3db Bandwidth | 300MHz |
| Dual Supply Voltage | 5V |
| Input Capacitance | 2pF |
| Consumer IC Type | VIDEO AMPLIFIER |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD8056AR-REEL7 Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. An op amp of this type is a Voltage Feedback-type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 8. In this case, there are 8 pins on the board. It has 8 pins that make up the linear amplifier. Op amp ic rates 5mV for input offset voltage. Surface Mount is the recommended mounting type for this linear amplifier. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. A supply current of 12mA can be used to operate this linear amplifier. You should keep the voltage gain at 71dB for the time being. Op amp ic has 2 channels. The operating supply voltage of the buffer op amp is rated at 10V. The quiescent current is 6mA. VIDEO AMPLIFIER can be used to sort the linear amplifier based on its consumer IC type.
AD8056AR-REEL7 Features
8 Pins
71dB voltage gain
AD8056AR-REEL7 Applications
There are a lot of Analog Devices Inc. AD8056AR-REEL7 Instrumentational OP Amps applications.
- Precision measurement
- High speed sample
- Signal operation
- Multiplication circuits
- Video data acquisition
- Gaming industry
- Test equipment
- Fast A/D and D/A converters
- Blood pressure sensors
- Displayers for aircraft and air transportation control systems
