Parameters |
Contact Plating |
Lead, Tin |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
2 |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
AD8056 |
Pin Count |
8 |
Operating Supply Voltage |
10V |
Supply Voltage-Max (Vsup) |
6V |
Supply Voltage-Min (Vsup) |
4V |
Number of Channels |
2 |
Operating Supply Current |
5.4mA |
Nominal Supply Current |
12mA |
Output Current |
60mA |
Quiescent Current |
6mA |
Slew Rate |
1400V/μs |
Amplifier Type |
Voltage Feedback |
Common Mode Rejection Ratio |
82 dB |
Current - Input Bias |
400nA |
Voltage - Supply, Single/Dual (±) |
8V~12V ±4V~6V |
Output Current per Channel |
60mA |
Input Offset Voltage (Vos) |
3mV |
Bandwidth |
300000 kHz |
Gain Bandwidth Product |
120MHz |
Voltage Gain |
71dB |
Power Supply Rejection Ratio (PSRR) |
66dB |
Settling Time |
20 ns |
-3db Bandwidth |
300MHz |
Dual Supply Voltage |
5V |
Input Capacitance |
2pF |
Consumer IC Type |
VIDEO AMPLIFIER |
Height Seated (Max) |
1.1mm |
Length |
3mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
AD8056ARM Overview
It is packaged in an 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. Op amps are Voltage Feedback types of amplifier on the chip. There is a Tube case that is delivered with the instrumentation amplifiers. During the past two weeks, there have been close to 8 terminations. There are a total of 8 pins on this op amp. 8 pins are included on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 3mV. The mounting type that is recommended for this electrical part is Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 5.4mA and 10 . You should keep the voltage gain at 71dB for the time being. There are a total of 2 channels available on the op amps. The operating supply voltage of the buffer op amp is rated at 10V. The current is quiescent at 6mA. Using VIDEO AMPLIFIER, you can sort the electric component based on the type of consumer IC that is included.
AD8056ARM Features
8 Pins
71dB voltage gain
AD8056ARM Applications
There are a lot of Analog Devices Inc. AD8056ARM Instrumentational OP Amps applications.
- Image computer boards
- Broadcasting
- Strain gauges
- Portable media players
- Communication device
- Power generator
- Computer workstations
- Portable docking station
- Vehicle electronics
- High/low-pass filter circuit