AD8056ARM-REEL7
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8056 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 10V |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Channels | 2 |
| Operating Supply Current | 12mA |
| Nominal Supply Current | 12mA |
| Output Current | 60mA |
| Quiescent Current | 6mA |
| Slew Rate | 1400V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 82 dB |
| Current - Input Bias | 400nA |
| Voltage - Supply, Single/Dual (±) | 8V~12V ±4V~6V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 300000 kHz |
| Gain Bandwidth Product | 120MHz |
| Voltage Gain | 71dB |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Voltage - Input Offset | 3mV |
| Settling Time | 20 ns |
| -3db Bandwidth | 300MHz |
| Dual Supply Voltage | 5V |
| Input Capacitance | 2pF |
| Consumer IC Type | VIDEO AMPLIFIER |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD8056ARM-REEL7 Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case in which the instrumentation amplifier is packaged. Voltage Feedback-type instrumentation amplifiers are used in this application. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. The number of terminations approaches 8. The total number of pins on linear amplifier is 8. In total, the buffer amplifier consists of 8 pins. In terms of input offset voltage, operational amplifier rates 5mV. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . A supply current of 12mA can be used to operate this linear amplifier. There should be no change in the voltage gain. Op amp ic has 2 channels. The operating supply voltage of instrumentation amplifier is rated 10V voltage. Linear amplifier has a quiescent current of 6mA. The electronic component's consumer IC type can be sorted with VIDEO AMPLIFIER.
AD8056ARM-REEL7 Features
8 Pins
71dB voltage gain
AD8056ARM-REEL7 Applications
There are a lot of Analog Devices Inc. AD8056ARM-REEL7 Instrumentational OP Amps applications.
- Differentiator circuits
- Automatic control
- Fast A/D and D/A converters
- Portable docking station
- E-book readers
- Industrial control system
- Signal transformation
- Navigation
- Medical instruments
- Non-polarized electrodes
