AD8057AR
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 800mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8057 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 6mA |
| Nominal Supply Current | 7.5mA |
| Power Dissipation | 800mW |
| Output Current | 25.3mA |
| Quiescent Current | 7.5mA |
| Slew Rate | 1150V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 500nA |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 25.3mA |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 100MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 55dB |
| Average Bias Current-Max (IIB) | 2.5μA |
| Power Supply Rejection Ratio (PSRR) | 54dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Settling Time | 30 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 325MHz |
| Bias Current-Max (IIB) @25C | 2.5μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 2pF |
| Wideband | YES |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD8057AR Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. An op amp ic of the Voltage Feedback type. Upon delivery, op amp ic is packaged in a Tube case. It is estimated that there will be at least 8 terminations this year. Linear amplifier has a total of 8 pins. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. This particular linear amplifier is a type of Operational Amplifier device, to be precise. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 1mV. Surface Mount is the recommended mounting type for this linear amplifier. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Using an 6mA supply current, this operational amplifier ics can be operated. Keeping the voltage gain at 55dB is the best course of action. Op amp ic has 1 channels. The operating supply voltage of instrumentation amplifier is rated 5V voltage. There is an 7.5mA quiescent current running through op amp ic.
AD8057AR Features
8 Pins
supply voltage of 5V
55dB voltage gain
AD8057AR Applications
There are a lot of Analog Devices Inc. AD8057AR Instrumentational OP Amps applications.
- Signal transformation
- Broadcasting
- Precision measurement
- Signal operation
- Signal filtering
- Fission chambers
- Cinema or auditorium audio system
- Wireless base stations
- Measurements of Wheatstone bridge
- Non-polarized electrodes
