AD8057ART-REEL7
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8057 |
| Pin Count | 5 |
| Number of Channels | 1 |
| Operating Supply Current | 6mA |
| Nominal Supply Current | 7.5mA |
| Power Dissipation | 500mW |
| Output Current | 25.3mA |
| Quiescent Current | 7.5mA |
| Slew Rate | 1150V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 500nA |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 25.3mA |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 100MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 55dB |
| Power Supply Rejection Ratio (PSRR) | 59dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Settling Time | 30 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 325MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 2pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Wideband | YES |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD8057ART-REEL7 Overview
It is packaged in an SC-74A, SOT-753-case that protects the operational amplifiers from damage. This is a Voltage Feedback type op amp. A Tape & Reel (TR) case is used to deliver the buffer op amp. There have been a total of 5 terminations over the past year. A total of 5 pins are attached to buffer op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. Instrumentation amplifier is a part of Operational Amplifier. The op amp ic has an array of 5 pins on it. Regarding input offset voltage, op amp rates 1mV. This electronic part is best mounted with type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. This op amp can operate from a supply current at 6mA. 55dB should remain the voltage gain. Op amp ic has 1 channels. The instrumentation amplifier is packed in the form of TAPE AND REEL. 7.5mA quiescent currents are flowing through buffer op amp.
AD8057ART-REEL7 Features
5 Pins
supply voltage of 5V
55dB voltage gain
AD8057ART-REEL7 Applications
There are a lot of Analog Devices Inc. AD8057ART-REEL7 Instrumentational OP Amps applications.
- Instrumentation
- Exponential operation circuits
- Micro signal measurement
- Differentiator circuits
- Weak signal detection
- Wireless base stations
- Comparator
- Commercial audio systems
- Thermocouples
- Information processing
