AD8057ARTZ-R2
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8057 |
| Pin Count | 5 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 6mA |
| Nominal Supply Current | 7.5mA |
| Power Dissipation | 500mW |
| Quiescent Current | 7.5mA |
| Min Input Voltage | 3V |
| Slew Rate | 1150V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 500nA |
| Max Input Voltage | 12V |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 325MHz |
| Gain Bandwidth Product | 100MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 55dB |
| Power Supply Rejection Ratio (PSRR) | 54dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| Max Frequency | 100kHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 2pF |
| Height | 1.3mm |
| Length | 3mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8057ARTZ-R2 Overview
The linear amplifier is packaged in a SC-74A, SOT-753 case which makes it easy for the consumer to handle. This is a Voltage Feedback type op amp. The op amp is delivered to you in a Tape & Reel (TR) case. The number of terminations is approaching the 5 mark. The total number of pins on linear amplifier is 5. This linear amplifier should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. In total, the buffer amplifier consists of 5 pins. Op amp ic rates 1mV for input offset voltage. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~85°C. Using an 6mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 55dB for the time being. There are 1 channels on the operational amplifiers. The operating supply voltage of instrumentation amplifier is rated 5V voltage. As a result, linear amplifier's quiescent current is 7.5mA.
AD8057ARTZ-R2 Features
5 Pins
supply voltage of 5V
55dB voltage gain
AD8057ARTZ-R2 Applications
There are a lot of Analog Devices Inc. AD8057ARTZ-R2 Instrumentational OP Amps applications.
- Signal amplification
- Information processing
- Navigation
- Digital cameras
- E-book readers
- Thermocouples
- Multiplication circuits
- High/low-pass filter circuit
- Automatic control
- High-frequency data acquisition systems
