AD8057ARZ
| Parameters | |
|---|---|
| Voltage - Input Offset | 1mV |
| Gain | 1 dB |
| Settling Time | 30 ns |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 2.5μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 2pF |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 800mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8057 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 7.5mA |
| Nominal Supply Current | 7.5mA |
| Power Dissipation | 800mW |
| Output Current | 25.3mA |
| Quiescent Current | 6mA |
| Slew Rate | 1150V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 500nA |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 25.3mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 325MHz |
| Gain Bandwidth Product | 100MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 55dB |
| Average Bias Current-Max (IIB) | 2.5μA |
| Power Supply Rejection Ratio (PSRR) | 59dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
AD8057ARZ Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. An op amp ic of the Voltage Feedback type. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. In recent months, the number of terminations has approached 8. A total of 8 pins are attached to buffer op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. It has 8 pins that make up the linear amplifier. Regarding input offset voltage, op amp rates 5mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. With regard to operating temperature, op amp ranges -40°C~85°C. This op amp can operate from a supply current at 7.5mA. Voltage gain should remain at 55dB. There are a total of 1 channels available on the op amps. The operating supply voltage of the buffer op amp is rated at 5V. The current is quiescent at 6mA.
AD8057ARZ Features
8 Pins
supply voltage of 5V
55dB voltage gain
AD8057ARZ Applications
There are a lot of Analog Devices Inc. AD8057ARZ Instrumentational OP Amps applications.
- High/low-pass filter circuit
- Automotive sensors
- Home audio systems
- Cinema or auditorium audio system
- RF cable systems
- Band-pass filter
- Polarized electrodes
- Broadcasting
- Video amplifiers
- Test and measurement instruments
