AD8058ARMZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 600mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8058 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Channels | 2 |
| Operating Supply Current | 15mA |
| Nominal Supply Current | 15mA |
| Power Dissipation | 600mW |
| Output Current | 25.3mA |
| Quiescent Current | 7.5mA |
| Slew Rate | 1150V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 500nA |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 25.3mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 325MHz |
| Gain Bandwidth Product | 100MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 55dB |
| Power Supply Rejection Ratio (PSRR) | 59dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 1mV |
| Settling Time | 30 ns |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 2pF |
| Height | 850μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8058ARMZ Overview
In order to protect the op amps, a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used. An op amp ic of the Voltage Feedback type. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 8 terminations in the next few months. Buffer amplifier has a total of 8 pins on it. This linear amplifier should be powered by an 5V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 5mV for input offset voltage. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. Using a supply current of 15mA , this buffer op amp will be able to operate. It is recommended to keep the voltage gain at 55dB at all times. Op amp ic has 2 channels. The operating supply voltage of instrumentation amplifier is rated 5V voltage. Currently, linear amplifier is operating with a quiescent current of 7.5mA.
AD8058ARMZ Features
8 Pins
supply voltage of 5V
55dB voltage gain
AD8058ARMZ Applications
There are a lot of Analog Devices Inc. AD8058ARMZ Instrumentational OP Amps applications.
- Television broadcasting equipment
- Switching amplifier
- Radiation thermometry transducers
- Subtraction operation circuits
- Addition operation circuits
- Television
- Communication device
- Tablets
- Differentiator circuits
- Proportional operation circuits
