AD8058ARZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 800mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8058 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Channels | 2 |
| Operating Supply Current | 15mA |
| Nominal Supply Current | 15mA |
| Power Dissipation | 800mW |
| Output Current | 25.3mA |
| Quiescent Current | 7.5mA |
| Slew Rate | 1150V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 500nA |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 25.3mA |
| Input Offset Voltage (Vos) | 5mV |
| Gain Bandwidth Product | 100MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 55dB |
| Power Supply Rejection Ratio (PSRR) | 59dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 1mV |
| Settling Time | 30 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 325MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 2pF |
| Wideband | YES |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8058ARZ-REEL7 Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. There are two types of operational amplifiers in this circuit. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. A total of 8 terminations have been reported in the past few weeks. The pins on this board total to 8 in total. This linear amplifier should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. An 8-pin op amp ic is included in the package. In terms of input offset voltage, operational amplifier rates 5mV. The mounting type that is recommended for this electrical part is Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Using an 15mA supply current, this operational amplifier ics can be operated. 55dB should remain the voltage gain. There are 2 channels on the operational amplifiers. The operating supply voltage of the buffer op amp is rated at 5V. TR is adopted to pack the instrumentation amplifier. There is a quiescent current of 7.5mA in this operational amplifier circuit.
AD8058ARZ-REEL7 Features
8 Pins
supply voltage of 5V
55dB voltage gain
AD8058ARZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8058ARZ-REEL7 Instrumentational OP Amps applications.
- Fission chambers
- Cinema or auditorium audio system
- Laptop
- Commercial audio systems
- Video data acquisition
- Active probe
- Digital cameras
- Differentiator circuits
- Scintillation detectors
- Automatic control
