AD8062ARZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8062 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Operating Supply Current | 19mA |
| Nominal Supply Current | 19mA |
| Power Dissipation | 800mW |
| Output Current | 50mA |
| Quiescent Current | 6.8mA |
| Slew Rate | 650V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 3.5μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~8V ±1.35V~4V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 6mV |
| Gain Bandwidth Product | 90MHz |
| Voltage Gain | 90dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 8V |
| Voltage - Input Offset | 1mV |
| Settling Time | 35 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 320MHz |
| Bias Current-Max (IIB) @25C | 9μA |
| Programmable Power | NO |
| Input Capacitance | 1pF |
| Wideband | YES |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8062ARZ-R7 Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. Buffer amps of this type are called Voltage Feedback-types. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. We are approaching the 8h termination of the year. Linear amplifier has a total of 8 pins. This linear amplifier should be powered by an 3V battery. It should be noted that this op amp is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Op amp rates 6mV as input offset voltage. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. An 19mA volt supply current is needed for this linear amplifier to operate. It is recommended to keep the voltage gain at 90dB at all times. There are a total of 2 channels available on the op amps. On the output type, there are Rail-to-Rail different types of op amps. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. There is an 6.8mA quiescent current in linear amplifier.
AD8062ARZ-R7 Features
8 Pins
supply voltage of 3V
90dB voltage gain
Output Type: Rail-to-Rail
AD8062ARZ-R7 Applications
There are a lot of Analog Devices Inc. AD8062ARZ-R7 Instrumentational OP Amps applications.
- Power generator
- Information processing
- Portable media players
- Signal filtering
- Subtraction operation circuits
- Integrator circuits
- Micro signal measurement
- Proportional operation circuits
- single/dual op amp sum and difference circuits
- Video data acquisition
