AD8063ART-REEL7
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8063 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 6.8mA |
| Nominal Supply Current | 9.5mA |
| Power Dissipation | 500mW |
| Output Current | 50mA |
| Quiescent Current | 9.5mA |
| Slew Rate | 650V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 3.5μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~8V ±1.35V~4V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 90MHz |
| Voltage Gain | 90dB |
| Average Bias Current-Max (IIB) | 8.5μA |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 8V |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 320MHz |
| Bias Current-Max (IIB) @25C | 9μA |
| Programmable Power | NO |
| Input Capacitance | 1pF |
| Wideband | YES |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD8063ART-REEL7 Overview
Packaging for the buffer amplifier is in the form of a SOT-23-6 case. Buffer amps of this type are called Voltage Feedback-types. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 6 terminations this year. Linear amplifier has a total of 6 pins. Please take in mind that this instrumentation amplifier should be run at 3V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. Linear amplifier includes 6 pins. Regarding input offset voltage, op amp rates 1mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . A supply current of 6.8mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 90dB. Buffer op amp is equipped with 1 channels on the device. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 5V. The instrumentation amplifier is packed in the form of TAPE AND REEL. There is a quiescent current of 9.5mA in this operational amplifier circuit.
AD8063ART-REEL7 Features
6 Pins
supply voltage of 3V
90dB voltage gain
Output Type: Rail-to-Rail
AD8063ART-REEL7 Applications
There are a lot of Analog Devices Inc. AD8063ART-REEL7 Instrumentational OP Amps applications.
- Commercial audio systems
- Image computer boards
- RF cable systems
- Video data acquisition
- Fast A/D and D/A converters
- Weighing systems
- Comparator
- Video amplifiers
- Precision measurement
- Communication device
