AD8063ARTZ-R2
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8063 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Operating Supply Current | 6.8mA |
| Nominal Supply Current | 9.5mA |
| Power Dissipation | 500mW |
| Quiescent Current | 9.5mA |
| Slew Rate | 650V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 3.5μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~8V ±1.35V~4V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 90MHz |
| Voltage Gain | 90dB |
| Average Bias Current-Max (IIB) | 8.5μA |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 8V |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 320MHz |
| Bias Current-Max (IIB) @25C | 9μA |
| Programmable Power | NO |
| Input Capacitance | 1pF |
| Wideband | YES |
| Height | 1.15mm |
| Length | 2.9mm |
| Width | 1.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8063ARTZ-R2 Overview
In order to protect the op amps, a SOT-23-6 case is used. An op amp ic of the Voltage Feedback type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. We are approaching the 6h termination of the year. There are a total of 6 pins on this op amp. Please take in mind that op amp should be run at 3V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. There are 6 pins on this chip. In terms of input offset voltage, operational amplifier rates 1mV. This electrical part should be mounted using type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureThe buffer amplifier is capable of operating from a supply current of 6.8mA . 90dB should remain the voltage gain. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of the buffer op amp is rated at 5V. As a result of this, the buffer amplifier is packed in TAPE AND REEL. There is an 9.5mA quiescent current running through op amp ic.
AD8063ARTZ-R2 Features
6 Pins
supply voltage of 3V
90dB voltage gain
Output Type: Rail-to-Rail
AD8063ARTZ-R2 Applications
There are a lot of Analog Devices Inc. AD8063ARTZ-R2 Instrumentational OP Amps applications.
- Power generator
- Broadcasting
- Weak signal detection
- Portable media players
- Power control
- Signal operation
- Multimedia playback equipment
- High/low-pass filter circuit
- Differentiator circuits
- Tablets
