AD8063ARZ-REEL7
| Parameters | |
|---|---|
| Bias Current-Max (IIB) @25C | 9μA |
| Programmable Power | NO |
| Input Capacitance | 1pF |
| Wideband | YES |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 800mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8063 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 9.5mA |
| Nominal Supply Current | 9.5mA |
| Power Dissipation | 800mW |
| Output Current | 50mA |
| Quiescent Current | 6.8mA |
| Slew Rate | 650V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 3.5μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~8V ±1.35V~4V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 6mV |
| Gain Bandwidth Product | 90MHz |
| Voltage Gain | 90dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 8V |
| Voltage - Input Offset | 1mV |
| Settling Time | 35 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 320MHz |
AD8063ARZ-REEL7 Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. There are two types of operational amplifiers in this circuit. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. It consists of a total of 8 pins in total. Please take in mind that this instrumentation amplifier should be run at 3V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The buffer op amp includes 8 pins. As far as the input offset voltage is concerned, linear amplifier rates at 6mV. For this electrical component, Surface Mount is the recommended mounting type. With regard to operating temperature, op amp ranges -40°C~85°C. Operational amplifier can operate supply current at 9.5mA. Keeping the voltage gain at 90dB is the best course of action. Instrumentation amplifier has 1 channels on it. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The operating supply voltage of instrumentation amplifier is rated 5V voltage. This linear amplifier pack is based on the TAPE AND REEL axis. There is an 6.8mA quiescent current in linear amplifier.
AD8063ARZ-REEL7 Features
8 Pins
supply voltage of 3V
90dB voltage gain
Output Type: Rail-to-Rail
AD8063ARZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8063ARZ-REEL7 Instrumentational OP Amps applications.
- Gaming industry
- Band-pass filter
- Differentiator circuits
- Biopotential
- Signal filtering
- Image computer boards
- Inverse/same-phase proportional circuit
- Portable docking station
- High speed sample
- Video amplifiers
