AD8065AR
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | FastFET™ |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8065 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 7.4mA |
| Nominal Supply Current | 7.4mA |
| Output Current | 35mA |
| Quiescent Current | 7.4mA |
| Slew Rate | 180V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 3pA |
| Voltage - Supply, Single/Dual (±) | 5V~24V ±2.5V~12V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Gain Bandwidth Product | 60MHz |
| Voltage Gain | 113dB |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Voltage - Input Offset | 400μV |
| Settling Time | 55 ns |
| -3db Bandwidth | 145MHz |
| Dual Supply Voltage | 9V |
| Input Capacitance | 2.1pF |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD8065AR Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. This is a Voltage Feedback type op amp. Upon delivery, op amp ic is packaged in a Tube case. The number of terminations approaches 8. A total of 8 pins are attached to buffer op amp. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. An 8-pin op amp ic is included in the package. Regarding input offset voltage, op amp rates 1.5mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. As long as the supply current of the chip does not exceed 7.4mA, this op amp ic can operate. 113dB should be the voltage gain. Instrumentation amplifier has 1 channels on it. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. FastFET? is the number that corresponds to the series of the buffer op amp. There is an 7.4mA quiescent current running through op amp ic.
AD8065AR Features
8 Pins
113dB voltage gain
Output Type: Rail-to-Rail
AD8065AR Applications
There are a lot of Analog Devices Inc. AD8065AR Instrumentational OP Amps applications.
- Division circuits
- Vehicle electronics
- earphone
- pH (acidity)
- Proportional counter tubes
- Portable docking station
- Radiation thermometry transducers
- Large motor controllers
- Computer workstations
- Automotive sensors
