AD8065ART-REEL7
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | FastFET™ |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8065 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 7.4mA |
| Nominal Supply Current | 7.4mA |
| Output Current | 35mA |
| Quiescent Current | 7.4mA |
| Slew Rate | 180V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 3pA |
| Voltage - Supply, Single/Dual (±) | 5V~24V ±2.5V~12V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Gain Bandwidth Product | 60MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 113dB |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Frequency Compensation | NO |
| Voltage - Input Offset | 400μV |
| Settling Time | 55 ns |
| -3db Bandwidth | 145MHz |
| Dual Supply Voltage | 9V |
| Input Capacitance | 2.1pF |
| Length | 2.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD8065ART-REEL7 Overview
The linear amplifier is packaged in a SC-74A, SOT-753 case. Op amps are Voltage Feedback types of amplifier on the chip. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations is approaching the 5 mark. In total, there are 5 pins on this op amp ic. I would like to remind you that this buffer op amp should be powered by an 5V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. The buffer op amp includes 5 pins. Regarding input offset voltage, op amp rates 1.5mV. This electronic part is best mounted with type Surface Mount. With regard to operating temperature, op amp ranges -40°C~85°C. As long as the supply current of the chip does not exceed 7.4mA, this op amp ic can operate. Voltage gain should remain at 113dB. As far as the device is concerned, buffer amplifier has 1 channels. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The FastFET? stands for the buffer op amp's serial number. Buffer amplifier has a quiescent current of 7.4mA.
AD8065ART-REEL7 Features
5 Pins
supply voltage of 5V
113dB voltage gain
Output Type: Rail-to-Rail
AD8065ART-REEL7 Applications
There are a lot of Analog Devices Inc. AD8065ART-REEL7 Instrumentational OP Amps applications.
- Communication device
- Video amplifiers
- E-book readers
- Information processing
- Switching amplifier
- Television
- Home audio systems
- Thermocouples
- Differentiator circuits
- Video data acquisition
