AD8065ARTZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | FastFET™ |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8065 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 7.4mA |
| Nominal Supply Current | 7.4mA |
| Output Current | 35mA |
| Quiescent Current | 7.4mA |
| Slew Rate | 180V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 3pA |
| Voltage - Supply, Single/Dual (±) | 5V~24V ±2.5V~12V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 145MHz |
| Gain Bandwidth Product | 60MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 113dB |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Frequency Compensation | NO |
| Voltage - Input Offset | 400μV |
| Settling Time | 55 ns |
| Dual Supply Voltage | 9V |
| Input Capacitance | 2.1pF |
| Length | 2.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8065ARTZ-REEL7 Overview
The linear amplifier is packaged in a SC-74A, SOT-753 case which makes it easy for the consumer to handle. There are two types of operational amplifiers in this circuit. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 5. In total, there are 5 pins on this op amp ic. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 5 pins are available on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 1.5mV voltage. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. This op amp can operate from a supply current at 7.4mA. There should be no change in the voltage gain. Instrumentation amplifier has 1 channels on it. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The FastFET? represents the op amp's series number. There is an 7.4mA quiescent current in linear amplifier.
AD8065ARTZ-REEL7 Features
5 Pins
supply voltage of 5V
113dB voltage gain
Output Type: Rail-to-Rail
AD8065ARTZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8065ARTZ-REEL7 Instrumentational OP Amps applications.
- Instrumentation
- Addition operation circuits
- Semiconductor detectors
- Mobile phone
- Broadcasting
- Thermocouples
- Voltage regulation circuit
- Power generator
- Video data acquisition
- Division circuits
