AD8065ARZ
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8065 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 7.4mA |
| Nominal Supply Current | 7.4mA |
| Output Current | 35mA |
| Quiescent Current | 7.4mA |
| Slew Rate | 180V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 3pA |
| Voltage - Supply, Single/Dual (±) | 5V~24V ±2.5V~12V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 145MHz |
| Gain Bandwidth Product | 60MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 113dB |
| Average Bias Current-Max (IIB) | 0.000006μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | NO |
| Frequency Compensation | NO |
| Voltage - Input Offset | 400μV |
| Gain | 1 dB |
| Settling Time | 55 ns |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.000006μA |
| Dual Supply Voltage | 9V |
| Input Capacitance | 2.1pF |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | FastFET™ |
AD8065ARZ Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. Op amps are Voltage Feedback types of amplifier on the chip. In the case of Tube cases, linear amplifier will be delivered. There have been a total of 8 terminations over the past year. It consists of a total of 8 pins in total. Please take in mind that this instrumentation amplifier should be run at 5V. It should be noted that this op amp is a type of Operational Amplifier device. 8 pins are located on the operational amplifiers. The input offset voltage is 1.5mV. Surface Mount is the recommended mounting type of operational amplifiers. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . Operational amplifier can operate supply current at 7.4mA. 113dB should remain the voltage gain. Buffer op amp is equipped with 1 channels on the device. On the output type, there are Rail-to-Rail different types of op amps. The FastFET? represents the op amp's series number. Currently, linear amplifier is operating with a quiescent current of 7.4mA.
AD8065ARZ Features
8 Pins
supply voltage of 5V
113dB voltage gain
Output Type: Rail-to-Rail
AD8065ARZ Applications
There are a lot of Analog Devices Inc. AD8065ARZ Instrumentational OP Amps applications.
- Signal operation
- Video computer boards
- High/low-pass filter circuit
- MP3
- High-frequency data acquisition systems
- Video amplifiers
- Large motor controllers
- Addition operation circuits
- Radiation thermometry transducers
- Communication device
