AD8065WARTZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 156mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | AD8065 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 7.4mA |
| Nominal Supply Current | 7.4mA |
| Output Current | 35mA |
| Quiescent Current | 7.4mA |
| Slew Rate | 180V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 3pA |
| Voltage - Supply, Single/Dual (±) | 5V~24V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 155MHz |
| Gain Bandwidth Product | 60MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 113dB |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | NO |
| Frequency Compensation | NO |
| Voltage - Input Offset | 400μV |
| Settling Time | 55 ns |
| -3db Bandwidth | 145MHz |
| Dual Supply Voltage | 5V |
| Input Capacitance | 2.1pF |
| Length | 2.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AD8065WARTZ-R7 Overview
In the package, you will find a SC-74A, SOT-753-case to contain the op amp ic. A Voltage Feedback-type buffer amplifier is shown here. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations is approaching the 5 mark. It consists of a total of 5 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 5 pins are located on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 1.5mV. The mounting type that is recommended for this electrical part is Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~105°C . This op amp can operate from a supply current at 7.4mA. There should be no change in the voltage gain at 113dB. Buffer op amp is equipped with 1 channels on the device. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. This buffer amplifier is assigned within the Automotive series by its manufacturer. Linear amplifier has a quiescent current of 7.4mA.
AD8065WARTZ-R7 Features
5 Pins
supply voltage of 5V
113dB voltage gain
Output Type: Rail-to-Rail
AD8065WARTZ-R7 Applications
There are a lot of Analog Devices Inc. AD8065WARTZ-R7 Instrumentational OP Amps applications.
- Signal transformation
- Video conversion and routing
- Test and measurement instruments
- Video amplifiers
- Switching amplifier
- Division circuits
- Micro signal measurement
- Fast A/D and D/A converters
- Addition operation circuits
- Instrumentation
