AD8066ARMZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | FastFET™ |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8066 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 14.8mA |
| Nominal Supply Current | 14.8mA |
| Output Current | 35mA |
| Quiescent Current | 7.4mA |
| Slew Rate | 180V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 3pA |
| Voltage - Supply, Single/Dual (±) | 5V~24V ±2.5V~12V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 130MHz |
| Gain Bandwidth Product | 60MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 103dB |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Frequency Compensation | NO |
| Voltage - Input Offset | 400μV |
| Gain | 1 dB |
| Settling Time | 55 ns |
| -3db Bandwidth | 145MHz |
| Dual Supply Voltage | 9V |
| Input Capacitance | 2.1pF |
| Height | 850μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8066ARMZ Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. The instrumentation amplifier in this picture is of the Voltage Feedback-type. A Tube case is used for delivering the op amp. There have been a total of 8 terminations over the past year. The pins on this board total to 8 in total. It is important to remember that this op amp should be operated at a voltage of 5V volts. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. An 8-pin op amp ic is included in the package. The input offset voltage is 1.5mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. This op amp can operate from a supply current at 14.8mA. It is a member of the 103dB's 103dB family. Instrumentation amplifier has 2 channels on it. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. Instrumentation amplifiers are numbered by their FastFET? series. There is an 7.4mA quiescent current running through op amp ic.
AD8066ARMZ Features
8 Pins
supply voltage of 5V
103dB voltage gain
Output Type: Rail-to-Rail
AD8066ARMZ Applications
There are a lot of Analog Devices Inc. AD8066ARMZ Instrumentational OP Amps applications.
- Mobile phone
- Comparator
- Navigation
- Weak signal detection
- Test and measurement instruments
- Automatic control
- Subtraction operation circuits
- Ultrasound transducers
- Automation control systems
- Power generator
