AD8066ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | FastFET™ |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8066 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 14.8mA |
| Nominal Supply Current | 14.8mA |
| Output Current | 35mA |
| Quiescent Current | 7.4mA |
| Slew Rate | 180V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 3pA |
| Voltage - Supply, Single/Dual (±) | 5V~24V ±2.5V~12V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 145MHz |
| Gain Bandwidth Product | 60MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 103dB |
| Average Bias Current-Max (IIB) | 0.000006μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | NO |
| Frequency Compensation | NO |
| Voltage - Input Offset | 400μV |
| Settling Time | 55 ns |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.000006μA |
| Dual Supply Voltage | 9V |
| Input Capacitance | 2.1pF |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8066ARZ Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. An op amp of this type is a Voltage Feedback-type. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations approaches 8. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 8 pins are included on the operational amplifiers. There is an input offset voltage of 1.5mV for this buffer op amp. This electronic part is best mounted with type Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. A supply current of 14.8mA can be used to operate this linear amplifier. 103dB should be the voltage gain. On the buffer amps, there are 2 channels that can be used. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. In this case, FastFET? represents the instrumentation amplifiers' series number. 7.4mA quiescent currents are flowing through buffer op amp.
AD8066ARZ Features
8 Pins
supply voltage of 5V
103dB voltage gain
Output Type: Rail-to-Rail
AD8066ARZ Applications
There are a lot of Analog Devices Inc. AD8066ARZ Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Differentiator circuits
- Precision measurement
- Test and measurement instruments
- High-frequency data acquisition systems
- Home audio systems
- Non-polarized electrodes
- Active probe
- Automation control systems
- Division circuits
