AD8067ARTZ-R2
| Parameters | |
|---|---|
| Micropower | NO |
| Max Frequency | 10kHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.5pF |
| Height | 1.3mm |
| Length | 3mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | FastFET™ |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8067 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 6.6mA |
| Nominal Supply Current | 7mA |
| Quiescent Current | 7mA |
| Slew Rate | 640V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 106 dB |
| Current - Input Bias | 0.6pA |
| Voltage - Supply, Single/Dual (±) | 5V~24V ±2.5V~12V |
| Output Current per Channel | 26mA |
| Input Offset Voltage (Vos) | 200μV |
| Bandwidth | 54MHz |
| Gain Bandwidth Product | 200MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 117dB |
| Power Supply Rejection Ratio (PSRR) | 87dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
AD8067ARTZ-R2 Overview
The linear amplifier is packaged in a SC-74A, SOT-753 case which makes it easy for the consumer to handle. This is a Voltage Feedback type op amp. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. The number of terminations approaches 5. There are a total of 5 pins on this op amp. I would like to remind you that this buffer op amp should be powered by an 5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. A total of 5 pins are present on the instrumentation amplifier. Op amp rates 200μV as input offset voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 6.6mA . 117dB should remain the voltage gain. There are a total of 1 channels available on the op amps. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. FastFET? corresponds to linear amplifier's series. Buffer amplifier has a quiescent current of 7mA.
AD8067ARTZ-R2 Features
5 Pins
supply voltage of 5V
117dB voltage gain
Output Type: Rail-to-Rail
AD8067ARTZ-R2 Applications
There are a lot of Analog Devices Inc. AD8067ARTZ-R2 Instrumentational OP Amps applications.
- Fast A/D and D/A converters
- Laptop
- RF cable systems
- Biopotential
- Exponential operation circuits
- Power transmission
- Medical imaging
- Digital cameras
- Fission chambers
- Measurements of Wheatstone bridge
