AD8067ARTZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | FastFET™ |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8067 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 7mA |
| Quiescent Current | 7mA |
| Slew Rate | 640V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 106 dB |
| Current - Input Bias | 0.6pA |
| Voltage - Supply, Single/Dual (±) | 5V~24V ±2.5V~12V |
| Output Current per Channel | 26mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 54MHz |
| Gain Bandwidth Product | 200MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 117dB |
| Power Supply Rejection Ratio (PSRR) | 109dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 200μV |
| Settling Time | 27 ns |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Input Capacitance | 1.5pF |
| Input Voltage Noise Density | 6.6nV/sqrt Hz |
| Length | 2.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8067ARTZ-REEL7 Overview
Op amp is packaged in SC-74A, SOT-753 case. A Voltage Feedback-type buffer amplifier is shown here. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. There have been a total of 5 terminations over the past year. Buffer amplifier has a total of 5 pins on it. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. This particular linear amplifier is a type of Operational Amplifier device, to be precise. In total, the buffer amplifier consists of 5 pins. Op amp rates 1mV as input offset voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, op amp ranges -40°C~85°C. This op amp can operate from a supply current at 7mA. Keeping the voltage gain at 117dB is the best course of action. 1 channels are available on the instrumentation amplifier. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. Instrumentation amplifiers are numbered by their FastFET? series. The current is quiescent at 7mA.
AD8067ARTZ-REEL7 Features
5 Pins
supply voltage of 5V
117dB voltage gain
Output Type: Rail-to-Rail
AD8067ARTZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8067ARTZ-REEL7 Instrumentational OP Amps applications.
- High speed sample
- Commercial audio systems
- RF cable systems
- Hand-held batteries
- Logarithmic operation circuits
- Proportional operation circuits
- Wireless base stations
- Radiation thermometry transducers
- Information processing
- Micro signal measurement
