AD8079AR
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 900mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8079 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 2 |
| Operating Supply Current | 11.5mA |
| Nominal Supply Current | 11.5mA |
| Power Dissipation | 900mW |
| Output Current | 70mA |
| Quiescent Current | 5.75mA |
| Slew Rate | 800V/μs |
| Amplifier Type | Buffer |
| Current - Input Bias | 3μA |
| Voltage - Supply, Single/Dual (±) | 6V~12V ±3V~6V |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 5mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 0.83dB |
| Average Bias Current-Max (IIB) | 10μA |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 10mV |
| Gain | 6 dB |
| Settling Time | 40 ns |
| -3db Bandwidth | 260MHz |
| Bias Current-Max (IIB) @25C | 6μA |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.5pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD8079AR Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. An op amp ic of the Buffer type. A Tube case is used for delivering the op amp. We are approaching the 8h termination of the year. A total of 8 pins are located on this board. I would like to remind you that this buffer op amp should be powered by an 5V battery. Linear amplifier includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 5mV. This electrical part should be mounted using type Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. As long as the supply current of the chip does not exceed 11.5mA, this op amp ic can operate. It is recommended to keep the voltage gain at 0.83dB at all times. As far as the device is concerned, buffer amplifier has 2 channels. There is an 5.75mA quiescent current in linear amplifier.
AD8079AR Features
8 Pins
supply voltage of 5V
0.83dB voltage gain
AD8079AR Applications
There are a lot of Analog Devices Inc. AD8079AR Instrumentational OP Amps applications.
- Active probe
- single/dual op amp sum and difference circuits
- Test and measurement instruments
- Cinema or auditorium audio system
- Industrial control system
- Voltage regulation circuit
- pH (acidity)
- Logarithmic operation circuits
- E-book readers
- Measurements of Wheatstone bridge
