AD8079ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 900mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8079 |
| Pin Count | 8 |
| Number of Channels | 2 |
| Operating Supply Current | 11.5mA |
| Power Dissipation | 900mW |
| Output Current | 70mA |
| Quiescent Current | 5.75mA |
| Slew Rate | 800V/μs |
| Amplifier Type | Buffer |
| Current - Input Bias | 3μA |
| Voltage - Supply, Single/Dual (±) | 6V~12V ±3V~6V |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 5mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 0.83dB |
| Average Bias Current-Max (IIB) | 10μA |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 10mV |
| Gain | 6 dB |
| Settling Time | 40 ns |
| -3db Bandwidth | 260MHz |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.5pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Input Voltage Noise Density | 2nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8079ARZ Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. An op amp ic of the Buffer type. The case in which buffer amplifier is delivered is called a Tube case. There is a growing number of terminations approaching the number of 8. Buffer amplifier has a total of 8 pins. It is important to remember that this op amp should be operated at a voltage of 5V volts. It has 8 pins that make up the linear amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 5mV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. As long as the supply current of the chip does not exceed 11.5mA, this op amp ic can operate. Voltage gain should remain at 0.83dB. There are a total of 2 channels available on the op amps. There is an 5.75mA quiescent current running through op amp ic.
AD8079ARZ Features
8 Pins
supply voltage of 5V
0.83dB voltage gain
AD8079ARZ Applications
There are a lot of Analog Devices Inc. AD8079ARZ Instrumentational OP Amps applications.
- High input resistance broadband
- Signal transformation
- Industrial applications including automation
- Active probe
- Automotive sensors
- Video data acquisition
- Proportional operation circuits
- Displayers for aircraft and air transportation control systems
- Oscilloscopes
- Strain gauges
