AD8079ARZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 900mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8079 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 2 |
| Operating Supply Current | 11.5mA |
| Nominal Supply Current | 11.5mA |
| Power Dissipation | 900mW |
| Output Current | 70mA |
| Quiescent Current | 5.75mA |
| Slew Rate | 800V/μs |
| Amplifier Type | Buffer |
| Current - Input Bias | 3μA |
| Voltage - Supply, Single/Dual (±) | 6V~12V ±3V~6V |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 5mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 0.83dB |
| Average Bias Current-Max (IIB) | 10μA |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 10mV |
| Gain | 6 dB |
| Settling Time | 40 ns |
| -3db Bandwidth | 260MHz |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.5pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8079ARZ-REEL7 Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. Buffer-type instrumentation amplifiers are used in this application. A Tape & Reel (TR) case is used to deliver the buffer op amp. There is a growing number of terminations approaching the number of 8. In this case, there are 8 pins on the board. I would like to remind you that this buffer op amp should be powered by an 5V battery. There are 8 pins on this chip. Regarding input offset voltage, op amp rates 5mV. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . Operational amplifier can operate supply current at 11.5mA. Maintain 0.83dB as the voltage gain. The op amp ic has 2 channels on it. As a result, linear amplifier's quiescent current is 5.75mA.
AD8079ARZ-REEL7 Features
8 Pins
supply voltage of 5V
0.83dB voltage gain
AD8079ARZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8079ARZ-REEL7 Instrumentational OP Amps applications.
- Automotive sensors
- Communication device
- Large motor controllers
- Voltage regulation circuit
- Fast A/D and D/A converters
- Vehicle electronics
- Integrator circuits
- Digital cameras
- ECG equipment
- Information processing
