AD8079BR-REEL
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 900mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8079 |
| Pin Count | 8 |
| Number of Channels | 2 |
| Operating Supply Current | 10mA |
| Nominal Supply Current | 11.5mA |
| Power Dissipation | 900mW |
| Output Current | 70mA |
| Quiescent Current | 10mA |
| Slew Rate | 800V/μs |
| Amplifier Type | Buffer |
| Current - Input Bias | 3μA |
| Voltage - Supply, Single/Dual (±) | 6V~12V ±3V~6V |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 5mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 0.83dB |
| Average Bias Current-Max (IIB) | 10μA |
| Power Supply Rejection Ratio (PSRR) | 49dB |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 10mV |
| Settling Time | 40 ns |
| -3db Bandwidth | 260MHz |
| Bias Current-Max (IIB) @25C | 6μA |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.5pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD8079BR-REEL Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. Op amps are Buffer types of amplifier on the chip. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. A total of 8 pins are attached to buffer op amp. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. 8 pins are located on the operational amplifiers. Op amp ic rates 5mV for input offset voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. With regard to operating temperature, this op amp functions well at -40°C~85°C. As long as the supply current of the chip does not exceed 10mA, this op amp ic can operate. Voltage gain should remain at 0.83dB. Buffer op amp is equipped with 2 channels on the device. Buffer amplifier has a quiescent current of 10mA.
AD8079BR-REEL Features
8 Pins
supply voltage of 5V
0.83dB voltage gain
AD8079BR-REEL Applications
There are a lot of Analog Devices Inc. AD8079BR-REEL Instrumentational OP Amps applications.
- Active probe
- pH (acidity)
- Tablets
- Test equipment
- PDA
- MP3
- Test and measurement instruments
- Signal filtering
- Fission chambers
- Band-stop filter
