AD8091ART-REEL7
| Parameters | |
|---|---|
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 1.8mV |
| Settling Time | 50 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 110MHz |
| Bias Current-Max (IIB) @25C | 2.6μA |
| Programmable Power | NO |
| Input Capacitance | 1.4pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Wideband | YES |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | AD8091 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 4.8mA |
| Nominal Supply Current | 5.5mA |
| Output Current | 45mA |
| Quiescent Current | 5.5mA |
| Slew Rate | 170V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 88 dB |
| Current - Input Bias | 1.4μA |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 1.6mV |
| Gain Bandwidth Product | 50MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 110000 kHz |
| Voltage Gain | 98dB |
AD8091ART-REEL7 Overview
In order to protect the op amps, a SC-74A, SOT-753 case is used. An op amp of this type is a Voltage Feedback-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 5 terminations this year. It consists of a total of 5 pins in total. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The op amp ic has an array of 5 pins on it. As far as the input offset voltage is concerned, linear amplifier rates at 1.6mV. This electrical part should be mounted using type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. It is possible to operate this buffer amplifier from a supply current of 4.8mA . It is recommended to keep the voltage gain at 98dB at all times. There are a total of 1 channels available on the op amps. On the output type, there are Rail-to-Rail different types of op amps. As a result of this, the buffer amplifier is packed in TAPE AND REEL. Buffer amplifier has a quiescent current of 5.5mA.
AD8091ART-REEL7 Features
5 Pins
supply voltage of 5V
98dB voltage gain
Output Type: Rail-to-Rail
AD8091ART-REEL7 Applications
There are a lot of Analog Devices Inc. AD8091ART-REEL7 Instrumentational OP Amps applications.
- Navigation
- Test and measurement instruments
- Medical imaging
- Logarithmic operation circuits
- Comparator
- Integrator circuits
- Subtraction operation circuits
- ECG equipment
- Automotive sensors
- Scintillation detectors
