AD8091ARTZ-R7
| Parameters | |
|---|---|
| Operating Supply Current | 5.5mA |
| Nominal Supply Current | 5.5mA |
| Output Current | 45mA |
| Quiescent Current | 5.5mA |
| Slew Rate | 170V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 88 dB |
| Current - Input Bias | 1.4μA |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 11mV |
| Bandwidth | 110MHz |
| Gain Bandwidth Product | 50MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 110000 kHz |
| Voltage Gain | 98dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 1.8mV |
| Settling Time | 50 ns |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 2.6μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.4pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Length | 2.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8091 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
AD8091ARTZ-R7 Overview
There is a SC-74A, SOT-753 case package that contains the instrumentation amplifiers. Op amps are Voltage Feedback types of amplifier on the chip. A Tape & Reel (TR) case is used for delivering the op amp. A total of 5 terminations have been reported in the past few weeks. In this case, there are 5 pins on the board. This linear amplifier should be powered by an 5V battery. Instrumentation amplifier is a part of Operational Amplifier. In total, the buffer amplifier consists of 5 pins. Regarding input offset voltage, op amp rates 11mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 5.5mA . Keeping the voltage gain at 98dB is the best course of action. There are a total of 1 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. This linear amplifier pack is based on the TAPE AND REEL axis. The current is quiescent at 5.5mA.
AD8091ARTZ-R7 Features
5 Pins
supply voltage of 5V
98dB voltage gain
Output Type: Rail-to-Rail
AD8091ARTZ-R7 Applications
There are a lot of Analog Devices Inc. AD8091ARTZ-R7 Instrumentational OP Amps applications.
- PDA
- single/dual op amp sum and difference circuits
- Portable electronic products powered by batteries
- Industrial applications including automation
- Broadcasting
- Semiconductor detectors
- Portable docking station
- Signal amplification
- Subtraction operation circuits
- Logarithmic operation circuits
