AD8099ARDZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8099 |
| Pin Count | 8 |
| Operating Supply Voltage | 10V |
| Number of Channels | 1 |
| Operating Supply Current | 16mA |
| Nominal Supply Current | 15mA |
| Quiescent Current | 16mA |
| Slew Rate | 1350V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 105 dB |
| Current - Input Bias | 6μA |
| Voltage - Supply, Single/Dual (±) | 5V~12V ±2.5V~6V |
| Output Current per Channel | 178mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 550MHz |
| Gain Bandwidth Product | 3 GHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 3800000 kHz |
| Voltage Gain | 81dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 100μV |
| Settling Time | 18 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 510MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.8pF |
| Input Voltage Noise Density | 0.95nV/sqrt Hz |
| Height | 1.65mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8099ARDZ Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) Exposed Pad case is used. An op amp of this type is a Voltage Feedback-type. The case in which buffer amplifier is delivered is called a Tube case. In recent months, the number of terminations has approached 8. A total of 8 pins are located on this board. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. It has 8 pins that make up the linear amplifier. Regarding input offset voltage, op amp rates 500μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . As long as the supply current of the chip does not exceed 16mA, this op amp ic can operate. There should be no change in the voltage gain. The op amp ic has 1 channels on it. The operating supply voltage of instrumentation amplifier is rated 10V voltage. There is a quiescent current of 16mA in this operational amplifier circuit.
AD8099ARDZ Features
8 Pins
supply voltage of 5V
81dB voltage gain
AD8099ARDZ Applications
There are a lot of Analog Devices Inc. AD8099ARDZ Instrumentational OP Amps applications.
- High-frequency data acquisition systems
- Test equipment
- Fast A/D and D/A converters
- Video computer boards
- Weak signal detection
- Signal filtering
- Ultrasound transducers
- Exponential operation circuits
- Strain gauges
- Commercial audio systems
