AD8129ARMZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 4MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8129 |
| Pin Count | 8 |
| Operating Supply Voltage | 12.6V |
| Number of Channels | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 10.8mA |
| Nominal Supply Current | 13mA |
| Output Current | 40mA |
| Min Input Voltage | 2.25V |
| Logic Function | Receiver |
| Slew Rate | 1070V/μs |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 500nA |
| Max Input Voltage | 12.6V |
| Voltage - Supply, Single/Dual (±) | 4.5V~25.2V ±2.25V~12.6V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 200μV |
| Bandwidth | 200MHz |
| Gain Bandwidth Product | 70MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 86dB |
| Settling Time | 20 ns |
| Dual Supply Voltage | 9V |
| Height | 850μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8129ARMZ Overview
Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. This is a Differential type op amp. A Tube case is used for delivering the op amp. It is estimated that there will be at least 8 terminations this year. In this case, there are 8 pins on the board. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. 8 pins are located on the operational amplifiers. In terms of input offset voltage, operational amplifier rates 200μV. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. A supply current of 10.8mA can be used to operate this linear amplifier. 86dB should remain the voltage gain. On the buffer amps, there are 1 channels that can be used. The operating supply voltage of instrumentation amplifier is rated 12.6V voltage. Instrumentation amplifier resistance should stay within the range of 4MOhm. The other types of analog IC are as follwed ANALOG CIRCUIT.
AD8129ARMZ Features
8 Pins
supply voltage of 5V
86dB voltage gain
Resistance of 4MOhm
AD8129ARMZ Applications
There are a lot of Analog Devices Inc. AD8129ARMZ Instrumentational OP Amps applications.
- Automotive sensors
- Instrumentation
- Vehicle electronics
- Multiplication circuits
- Television
- Digital cameras
- Power control
- Addition operation circuits
- Biopotential
- Voltage regulation circuit
