AD8129ARZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 4MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8129 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Min (Vsup) | 2.25V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 10.8mA |
| Logic Function | Receiver |
| Slew Rate | 1070V/μs |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 94 dB |
| Current - Input Bias | 500nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~25.2V ±2.25V~12.6V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 200μV |
| Gain Bandwidth Product | 200MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 86dB |
| Voltage - Input Offset | 200μV |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8129ARZ-REEL7 Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. Differential-type instrumentation amplifiers are used in this application. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. A total of 8 terminations have been reported in the past few weeks. There are a total of 8 pins on this op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. It has 8 pins that make up the linear amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 200μV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 10.8mA and 10 . Voltage gain should remain at 86dB. A total of 1 elements are present in this linear amplifier. Instrumentation amplifier resistance should stay within the range of 4MOhm. An analog IC that is also used in this instrumentation amplifier is referred to as the ANALOG CIRCUIT type.
AD8129ARZ-REEL7 Features
8 Pins
supply voltage of 5V
86dB voltage gain
Resistance of 4MOhm
AD8129ARZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8129ARZ-REEL7 Instrumentational OP Amps applications.
- Biopotential
- Band-pass filter
- Signal filtering
- Multiplication circuits
- High-frequency data acquisition systems
- Switching amplifier
- Digital cameras
- Image computer boards
- Broadcasting
- RF cable systems
