AD8130ARMZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 6MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8130 |
| Pin Count | 8 |
| Operating Supply Voltage | 12.6V |
| Number of Channels | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 10.8mA |
| Nominal Supply Current | 13mA |
| Output Current | 40mA |
| Min Input Voltage | 2.25V |
| Logic Function | Receiver |
| Slew Rate | 1100V/μs |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 500nA |
| Max Input Voltage | 12.6V |
| Voltage - Supply, Single/Dual (±) | 4.5V~25.2V ±2.25V~12.6V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 400μV |
| Bandwidth | 270MHz |
| Gain Bandwidth Product | 110MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 71dB |
| Settling Time | 20 ns |
| -3db Bandwidth | 290MHz |
| Dual Supply Voltage | 9V |
| Height | 850μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8130ARMZ Overview
Op amp is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. There are two types of operational amplifiers in this circuit. Upon delivery, op amp ic is packaged in a Tube case. It is estimated that there will be at least 8 terminations this year. The pins on this board total to 8 in total. This linear amplifier should be powered by an 5V battery. Linear amplifier includes 8 pins. The input offset voltage is 400μV. This electrical part should be mounted using type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. An 10.8mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. On the buffer amps, there are 1 channels that can be used. The operating supply voltage of the buffer op amp is rated at 12.6V. 6MOhm should be the range of resistance for the linear amplifier. It should be noted that the other type of analog integrated circuit used in this instrumentation amplifier is known as the ANALOG CIRCUIT.
AD8130ARMZ Features
8 Pins
supply voltage of 5V
71dB voltage gain
Resistance of 6MOhm
AD8130ARMZ Applications
There are a lot of Analog Devices Inc. AD8130ARMZ Instrumentational OP Amps applications.
- Cinema or auditorium audio system
- Band-pass filter
- Integrator circuits
- Video amplifiers
- Mobile phone
- Addition operation circuits
- PDA
- Signal filtering
- Signal amplification
- Computer workstations
