AD8130ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 6MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8130 |
| Pin Count | 8 |
| Operating Supply Voltage | 12.6V |
| Number of Channels | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 10.8mA |
| Nominal Supply Current | 13mA |
| Output Current | 40mA |
| Min Input Voltage | 2.25V |
| Logic Function | Receiver |
| Slew Rate | 1100V/μs |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 500nA |
| Max Input Voltage | 12.6V |
| Voltage - Supply, Single/Dual (±) | 4.5V~25.2V ±2.25V~12.6V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 400μV |
| Bandwidth | 270MHz |
| Gain Bandwidth Product | 110MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 71dB |
| Settling Time | 20 ns |
| -3db Bandwidth | 290MHz |
| Dual Supply Voltage | 9V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8130ARZ Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. Op amps are Differential types of amplifier on the chip. The op amp is delivered to you in a Tube case. The number of terminations approaches 8. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. The op amp ic has an array of 8 pins on it. With regard to input offset voltage, instrumentation amplifier is rated at 400μV. This electronic part is best mounted with type Surface Mount. With regard to operating temperature, op amp ranges -40°C~85°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 10.8mA and 10 . 71dB should be the voltage gain. On the buffer amps, there are 1 channels that can be used. The operating supply voltage of the buffer op amp is rated at 12.6V. Instrumentation amplifier resistance should stay within the range of 6MOhm. The other types of analog IC are as follwed ANALOG CIRCUIT.
AD8130ARZ Features
8 Pins
supply voltage of 5V
71dB voltage gain
Resistance of 6MOhm
AD8130ARZ Applications
There are a lot of Analog Devices Inc. AD8130ARZ Instrumentational OP Amps applications.
- Inverse/same-phase proportional circuit
- Multimedia playback equipment
- Weak signal detection
- Video conversion and routing
- Large motor controllers
- Cinema or auditorium audio system
- Micro signal measurement
- Wireless base stations
- Vehicle electronics
- Band-pass filter
