AD8131ARM
| Parameters | |
|---|---|
| Current - Input Bias | 500nA |
| Voltage - Supply, Single/Dual (±) | 2.8V~11V ±1.4V~5.5V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 2mV |
| Gain Bandwidth Product | 400MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 6.19dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 1.5mV |
| Dual Supply Voltage | 3V |
| Height | 850μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 139.989945mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 1.5kOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 250mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8131 |
| Pin Count | 8 |
| Operating Supply Voltage | 3V |
| Number of Elements | 1 |
| Power Supplies | 5/+-5V |
| Operating Supply Current | 10.25mA |
| Power Dissipation | 250mW |
| Slew Rate | 2000V/μs |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 70 dB |
AD8131ARM Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case which makes it easy for the consumer to handle. An op amp ic of the Differential type. The case in which buffer amplifier is delivered is called a Tube case. A total of 8 terminations have been reported in the past few weeks. A total of 8 pins are attached to buffer op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The op amp ic has an array of 8 pins on it. Regarding input offset voltage, op amp rates 2mV. For this electronic part, it is recommended that you mount it with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 10.25mA . Keeping the voltage gain at 6.19dB is the best course of action. According to the specifications of the buffer op amp, the operating supply voltage is rated at 1. The operating supply voltage of instrumentation amplifier is rated 3V voltage. Op amp resistance should stay within the range of 1.5kOhm.
AD8131ARM Features
8 Pins
supply voltage of 5V
6.19dB voltage gain
Resistance of 1.5kOhm
AD8131ARM Applications
There are a lot of Analog Devices Inc. AD8131ARM Instrumentational OP Amps applications.
- Industrial applications including automation
- Weak signal detection
- pH (acidity)
- Information processing
- Large motor controllers
- Television
- Logarithmic operation circuits
- Biopotential
- High gain DC amplifier
- Broadcasting
