AD8131ARMZ
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 1.5kOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 250mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8131 |
| Pin Count | 8 |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Operating Supply Current | 10.25mA |
| Nominal Supply Current | 11.5mA |
| Power Dissipation | 250mW |
| Output Current | 60mA |
| Min Input Voltage | 1.4V |
| Slew Rate | 2000V/μs |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 500nA |
| Max Input Voltage | 5.5V |
| Voltage - Supply, Single/Dual (±) | 2.8V~11V ±1.4V~5.5V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 400MHz |
| Gain Bandwidth Product | 400MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 6.19dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Voltage - Input Offset | 1.5mV |
| Settling Time | 14 ns |
| Dual Supply Voltage | 5V |
| Height | 850μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
AD8131ARMZ Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case which makes it easy for the consumer to handle. A Differential-type buffer amplifier is shown here. The op amp is delivered to you in a Tube case. The number of terminations approaches 8. The pins on this board total to 8 in total. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. Instrumentation amplifier is a part of Operational Amplifier. 8 pins are located on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 2mV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. As long as the supply current of the chip does not exceed 10.25mA, this op amp ic can operate. It is a member of the 6.19dB's 6.19dB family. The op amp ic has 1 channels on it. The operating supply voltage of instrumentation amplifier is rated 5.5V voltage. Instrumentation amplifier resistance should remain within the range of 1.5kOhm.
AD8131ARMZ Features
8 Pins
supply voltage of 5V
6.19dB voltage gain
Resistance of 1.5kOhm
AD8131ARMZ Applications
There are a lot of Analog Devices Inc. AD8131ARMZ Instrumentational OP Amps applications.
- Digital cameras
- Signal amplification
- High speed sample
- Scintillation detectors
- Computer workstations
- Comparator
- High-frequency data acquisition systems
- Power generator
- Integrator circuits
- Test equipment
