AD8131ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 1.5kOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 250mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8131 |
| Pin Count | 8 |
| Output Voltage | 3.7V |
| Operating Supply Voltage | 9V |
| Number of Channels | 1 |
| Operating Supply Current | 10.25mA |
| Nominal Supply Current | 11.5mA |
| Power Dissipation | 250mW |
| Output Current | 60mA |
| Max Output Voltage | 3.7V |
| Slew Rate | 2000V/μs |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 500nA |
| Voltage - Supply, Single/Dual (±) | 2.8V~11V ±1.4V~5.5V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 400MHz |
| Gain Bandwidth Product | 400MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 6.19dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Voltage - Input Offset | 1.5mV |
| Settling Time | 14 ns |
| Dual Supply Voltage | 5V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8131ARZ Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. Op amps are Differential types of amplifier on the chip. Instrumentation amplifier is delivered in a Tube case. There have been a total of 8 terminations over the past year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 8 pins are included on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 2mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 10.25mA and 10 . 6.19dB should be the voltage gain. 1 channels are available on the instrumentation amplifier. The operating supply voltage of the buffer op amp is rated at 9V. 1.5kOhm is the range in which the op amp resistance should lie.
AD8131ARZ Features
8 Pins
supply voltage of 5V
6.19dB voltage gain
Resistance of 1.5kOhm
AD8131ARZ Applications
There are a lot of Analog Devices Inc. AD8131ARZ Instrumentational OP Amps applications.
- Differentiator circuits
- RF cable systems
- Power control
- Signal amplification
- Micro signal measurement
- Laptop
- MP3
- Navigation
- Portable docking station
- Semiconductor detectors
