AD8131ARZ-REEL
| Parameters | |
|---|---|
| Pin Count | 8 |
| Number of Elements | 1 |
| Power Supplies | 5/+-5V |
| Operating Supply Current | 10.25mA |
| Power Dissipation | 250mW |
| Slew Rate | 2000V/μs |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 500nA |
| Voltage - Supply, Single/Dual (±) | 2.8V~11V ±1.4V~5.5V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 2mV |
| Gain Bandwidth Product | 400MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 6.19dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 1.5mV |
| Neg Supply Voltage-Max (Vsup) | -5.5V |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 1.5kOhm |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8131 |
AD8131ARZ-REEL Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. The instrumentation amplifier in this picture is of the Differential-type. A Tape & Reel (TR) case is used for delivering the op amp. A total of 8 terminations have been reported in the past few weeks. It consists of a total of 8 pins in total. Please take in mind that this instrumentation amplifier should be run at 5V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 8 pins are located on the operational amplifiers. In terms of input offset voltage, operational amplifier rates 2mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . Using an 10.25mA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain. The total number of elements in this buffer amplifier is 1. In order for the op amp resistance to remain within the 1.5kOhm range, the op amp should be tested.
AD8131ARZ-REEL Features
8 Pins
supply voltage of 5V
6.19dB voltage gain
Resistance of 1.5kOhm
AD8131ARZ-REEL Applications
There are a lot of Analog Devices Inc. AD8131ARZ-REEL Instrumentational OP Amps applications.
- Inverse/same-phase proportional circuit
- Micro signal measurement
- Multimedia playback equipment
- MP3
- Large motor controllers
- Wireless base stations
- High/low-pass filter circuit
- Voltage regulation circuit
- Strain gauges
- Band-stop filter
