AD8138ARMZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 139.989945mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | ADC Driver |
| Resistance | 6MOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Data Acquisition |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8138 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 11V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 20mA |
| Power Dissipation | 550mW |
| Slew Rate | 1150 V/μs |
| Common Mode Rejection Ratio | 70 dB |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 320MHz |
| Differential Output | YES |
| Voltage Gain | 0.028dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Input Characteristics | DIFFERENTIAL |
| Max Dual Supply Voltage | 5.5V |
| -3db Bandwidth | 320MHz |
| Driver Number of Bits | 1 |
| Min Dual Supply Voltage | 1.4V |
| Interface Standard | GENERAL PURPOSE |
| Input Bias Current | 7μA |
| Negative Supply Voltage-Nom | -5V |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8138ARMZ-REEL Overview
The package contains a Tape & Reel (TR) value.Definitely a ADC Driver to consider.The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package was dispatched with this item.As you can see, the part is mounted into the Surface Mount axis.Mostly, it is used in Data Acquisition.There is a base part number for this device that is AD8138.There are 1 functions here which are used for accessing high performance for amplification purposes.8 terminals are available in total, each of which is capable of performing a different task.The iron temperature should be controlled under 260 when starting the peak relow process for the part.There are 8 pins on the part in total.A supply voltage of 5V is recommended for this amplifier to operate properly.Custom 8-pin amplifier.Having a very low temperature of as low as -40°C is the lowest that a device can operate at.Interestingly, this part can work at a temperature of up to 85°C, which is impressive.This product incorporates Surface Mount in order to enhance design flexibility.It is rated for a maximum voltage of 11V.Powered by at least 2.7V.The performance of this video processing device is amazing due to the combination of 1 channels.This amplifier presents an excellent volktage gain of 0.028dB.6MOhm resistance is specified for this amplifier.To keep the amplifier working normally, it is advised to set the supply current to 20mA.There is a bandwidth performance of 320MHz at -3db.
AD8138ARMZ-REEL Features
AD8138ARMZ-REEL Applications
There are a lot of Analog Devices Inc. AD8138ARMZ-REEL Special Purpose Amplifiers applications.
- Tablets
- E-book readers
- Radar
- Fast A/D and D/A converters, video amplifiers
- Video data acquisition
- Portable docking station
- Comparator
- Micro signal measurement
- single/dual op amp sum and difference circuits
- MP3
