AD813ANZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Applications | Current Feedback |
| Max Power Dissipation | 1.6W |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | AD813 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 18V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 1.2V |
| Number of Channels | 3 |
| Operating Supply Current | 16.5mA |
| Nominal Supply Current | 16.5mA |
| Power Dissipation | 1.6W |
| Output Current | 50mA |
| Quiescent Current | 5.5mA |
| Slew Rate | 250V/μs |
| Common Mode Rejection Ratio | 62 dB |
| Voltage - Supply, Single/Dual (±) | 2.4V~36V ±1.2V~18V |
| Output Current per Channel | 50mA |
| Supply Type | Dual, Single |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 125MHz |
| Voltage Gain | 70dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Settling Time | 40 ns |
| -3db Bandwidth | 100MHz |
| Dual Supply Voltage | 15V |
| Input Capacitance | 1.7pF |
| Input Bias Current | 500nA |
| Consumer IC Type | VIDEO AMPLIFIER |
| Height | 4.95mm |
| Length | 20.19mm |
| Width | 7.11mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD813ANZ Overview
A Tube encapsulates class d amplifier.For the sake of reducing space, class d amp is accessible in the 14-DIP (0.300, 7.62mm) package.High performance makes audio amplifier an excellent choice for Current Feedback.Mounting audio power amplifier on the PCB is done using the Through Hole method.Audio amp can be located using its base part number AD813.The number of pins is 14.Digital amplifier has a termination count of 14.Its -3db bandwidth is 100MHz.Audio amplifier runs on 16.5mA supply current.The circuamplifier ic is built using 14 pins.Temperatures should be below 125°C.It is recommended to keep the operating temperature at least -55°C.There are currently 3 channels available.This amplifier is equipped with a consumer IC type of VIDEO AMPLIFIER.If the supply voltage (Vsup) is not above 1.2V, the audio amplifier will not operate correctly.A maximum supply voltage (Vsup) of 18V is set.This scenario results in a current output of 50mA.As far as its supply type is concerned, it is Dual, Single.There is a voltage gain of 70dB in the audio amplifier ic.An external influence cannot affect it since it consumes 5.5mA quiescent current.
AD813ANZ Features
14 pins
3 channels
AD813ANZ Applications
There are a lot of Analog Devices Inc. AD813ANZ Video Amps and Modules applications.
- Automotive head unit
- Audio Test And Measurement
- Aftermarket telematics
- Body Control Modules
- Professional Audio Equipment
- Analog and Digital Mixing Consoles
- Analog and Digital Mixing Consoles
- High-Fidelity (HiFi) Headphone Drivers
- High-End A/V Receivers
- Telematics control unit
