AD813AR-14
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Applications | Current Feedback |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD813 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 15V |
| Supply Voltage-Max (Vsup) | 18V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 1.2V |
| Number of Channels | 3 |
| Operating Supply Current | 16.5mA |
| Nominal Supply Current | 5.5mA |
| Power Dissipation | 1W |
| Output Current | 50mA |
| Quiescent Current | 5.5mA |
| Slew Rate | 250V/μs |
| Common Mode Rejection Ratio | 62 dB |
| Voltage - Supply, Single/Dual (±) | 2.4V~36V ±1.2V~18V |
| Output Current per Channel | 50mA |
| Supply Type | Single |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 50MHz |
| Voltage Gain | 70dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Settling Time | 40 ns |
| -3db Bandwidth | 100MHz |
| Input Capacitance | 1.7pF |
| Input Bias Current | 500nA |
| Consumer IC Type | VIDEO AMPLIFIER |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD813AR-14 Overview
A Tube is used to package class d amplifier.Due to space constraints, class d amp's available in 14-SOIC (0.154, 3.90mm Width).Because of audio amplifiers high performance, audio amplifier is an excellent choice for Current Feedback.A Surface Mount mounting method is used to connect audio power amplifier to the PCB.In order to find audio amp, use its base part number AD813.On audio digital amplifier, there is a pin count of 14.Digital amplifier consists of 14 terminations.Its -3db bandwidth is 100MHz.An electric current of 16.5mA is supplied to audio amplifier.The board is constructed using 14 pins.Operating temperatures must be lower than 125°C.It is recommended that the operating temperature be at least -55°C.There are currently 3 channels available.VIDEO AMPLIFIER is the consumer IC type of the amplifier.Normally, the supply voltage (Vsup) should be above 1.2V.A maximum supply voltage (Vsup) of 18V is set.A 50mA output current is used in this scenario.During audio amplifier ics use, 15V supply voltage is provided.A single supply type is available for this item, which is Single.This audio amplifier ic gains a voltage of 70dB when it is powered up.A quiescent current of 5.5mA is consumed by the audio amplifier ic, and external influences are not a factor.
AD813AR-14 Features
14 pins
3 channels
AD813AR-14 Applications
There are a lot of Analog Devices Inc. AD813AR-14 Video Amps and Modules applications.
- HiFi Audio System Equipment
- Analog and Digital Mixing Consoles
- High-End A/V Receivers
- Professional Audio Equipment
- Premium Audio
- Automotive external amplifier
- Set-Top Box
- Broadcast Studio Equipment
- Telematics control unit
- Emergency call (eCall)
